This type of modulator supports the DVB-T2 standard. DVB-T2 modulator 1ch has input BNC connector and can be produced with F-, N- or SMA-type of output connectors by order. The DVB-T-T2 Modulator is professional device and it is usually used by TV operators for modulation up to QAM256.
KEY FEATURES:
- Universal RS-232 management protocol
- PSI tables generator
- Up to 16k carrier mode
- “Carrier only” mode
- BUC power injection 24V, 3A
- 10 MHz reference, 10-6-10-8 stability (optionally)
Input Parameters |
ASI |
1xASI, 188/204 Bytes MPEG-TS |
Interface |
BNC |
Input impedance |
75 Ω |
Modulator |
Modulation type |
DVB-T2 |
Constellation |
QPSK, 16QAM, 64QAM, 256QAM |
MER |
>42 dB @ 500 MHz |
FEC |
1/2 3/5 2/3 3/4 4/5 5/6 |
Constellation rotate |
Embedded, Disable |
COFDM Mode |
1k, 2k, 4k, 8k, 8k ext., 16k, 16k ext. |
Pilot S |
PP2, PP3, PP8 |
Guard interval |
1/4 19/128 1/8 19/256 1/16 1/32 1/128 |
Bandwidth |
1.7, 5, 6, 7 and 8 MHz |
RF Output |
Power |
-27 – 0 dBm |
Output frequency range |
10 MHz–1100 MHz in 1 kHz-steps |
«Carrier only» mode |
Yes |
10 MHz reference |
10-6-10-8 stability (optional) |
Connector type |
F-female (N or SMA optional) |
Power injection |
24V, 3A (optional) |
Management |
Interface |
1 x RS-232 port, keyboard and LCD(optional) |
Miscellaneous |
Front panel |
3.5’’ LCD with 8 x Control Button (optional) |
2 x Power button (Main and BUC) |
Rear panel |
1 x ASI input |
1 x IF output |
1 x RS-232 (DB-9) port |
1 x Power Supply Receptacle (AC Input) with Fuse |
1 x GND connector |
Power Supply |
Input voltage |
90-250 VAC, 50/60Hz |
Power consumption, max |
30 W (Typ.) |
Environmental |
Operating temperature |
0℃ to +45℃ (32℉ to +113℉) |
Storage temperature |
-20℃ to +80℃ (-4℉ to +176℉) |
Operating humidity |
≤90%, non‐condensing |
Mechanical |
Dimensions (W x H x D) |
483mm x 44.5mm x 300mm (1 RU) |
Weight |
2 Kg approx. |
Taking into consideration that we (UMT LLC) are developer and system integrator, also do not stop on our technical growth and improvement, know that view of all our devices and equipment including their technical parameters may be different from pictures presented on website and parameters listed on each device webpage.
Note! All details customer has to confirm in advance during ordering and before payment. Those parameters that were not specified and / or were not agreed while ordering will be implemented as basic at the discretion of the manufacturer. Each our customer has 1.5 year warranty and 7 year aftersales support for whole range of our products.