1668

DVB-T-T2 Regenerator

Short description

DVB-T-T2 Regenerator is professional multichannel device which allows to completely restore a weak noisy signals and transmit them for further broadcasting. It regenerates the signals of the DVB-T/T2 to T/T2 standard.

- +
  • Description
  • Downloads

This type of regenerator supports the DVB-T/T2 standard. DVB-T/T2 Regenerator is controlled by our own developed VCC software by Ethernet. DVB-T/T2 Regenerator can be produced with N-, F- or SMA-type of input / output connectors by order.

KEY FETURES:

  • can be produced from 1 to 32 independent regeneration channels;
  • high stable hardware;
  • fast and high reliable control software;
  • remote control by Ethernet.

MAIN FUNCTIONS:

  • if power is lost all saved settings are recovered in the device after restoration of supply;
  • integrated over‐voltage protection;
  • integrated over‐load protection;
  • integrated short‐circuit protection.

 

Inputs
The input level -65 … -25 dBm
RF Frequency range (DVB-T) 10 MHz-1100 MHz in 1 kHz-steps
Interface, connector type RF, N-type (F or SMA as option)
RF Output:
RFout (50Ω) 80-100 dBµV
Number of inputs, connector type RF output N-type (F or SMA as option)
Injection Optionaly can provide injection of DC and 10 MHz reference
Modulation parameters DVB-T mode (T2 by request)
Constellation   QAM16 / QAM32 or QAM64 (by request)
Modulation Error Rate (MER)   >40 dB
FEC  1/2 , 2/3 , 3/4 , 5/6 , 7/8
Symbolrate   –
Bandwidth  5, 6,7,8 MHz
Signals injection 
10 MHz reference  10-6-10-8 stability (optionally)
Power injection  for the BUC 24V, 3А (optionally)
Adjustment
Interface RJ-45, Ethernet
Power Supply
Input Voltage  110‐240 V AC, 50/60 Hz
Power Consumption  6W per channel
Environmental
Operating Temperature  0℃ to 45℃ (32℉ to 113℉)
Storage Temperature ‐20℃ to 80℃ (‐4℉ to 176℉)
Operating Humidity  90%, non‐condensing 
Mechanical 
Dimensions (W x H x D)  1RU: 483mm x 44.5mm x 450mm, 19’’ x 1.73’’ (1RU) x 17.7’’
2RU: 483mm x 89mm x 450mm, 19’’ x 3.5’’ (2RU) x 17.7’’

Taking into consideration that we (UMT LLC) are developer and system integrator, also do not stop on our technical growth and improvement, know that view of all our devices and equipment including their technical parameters may be different from pictures presented on website and parameters listed on each device webpage. 
Note! All details customer has to confirm in advance during ordering and before payment. Those parameters that were not specified and / or were not agreed while ordering will be implemented as basic at the discretion of the manufacturer. Each our customer has 1.5 year warranty and 7 year aftersales support for whole range of our products. 

Documentation