Home » RF Distribution » Crossover
img
img

1730

Crossover

Short description

Crossover developed by UMT LLC is designed especially for step-up converter blocks power supplying. It has integrated stable pulsed power supply source inside, which is characterized by high performance.

- +

Request for customized equipment

    [recaptcha]
    • Description
    • Downloads

    Crossover is used for indoor application and supplied step-up converter blocks can be located outside. As a result you obtain efficient, safety and reliable in operation system.

    For this purpose, next devices are installed into the block: 

    • network pulsed power supplies (AC/DC-converters); 
    • amplifier;
    • and power injector

    Power supply voltage with RF signal are delivered to ODU blocks.

     

    General parameters
    Frequency range, MHz L-band (other by request) 
    Input, output impedance, Ohm 50Ω / 75Ω
    VSWR input/output 1.5
    Gain variation (on each of the outputs relative to inputs), dB by order
    Nominal output voltage А (main) and В (reserve), V +24
    Maximal load current on outputs, А 2.5
    Maximal power, consumption of network, W 200
    Input connector N-Type or F – type (Female)
    Output connector N-Type or F – type (Female)

    Taking into consideration that we (UMT LLC) are developer and system integrator, also do not stop on our technical growth and improvement, know that view of all our devices and equipment including their technical parameters may be different from pictures presented on website and parameters listed on each device webpage. 
    Note! All details customer has to confirm in advance during ordering and before payment. Those parameters that were not specified and / or were not agreed while ordering will be implemented as basic at the discretion of the manufacturer. Each our customer has 1.5 year warranty and 7 year aftersales support for whole range of our products. 

    Documentation

    Related products

    BUC-Ku002-8.8

    BUC-Ku002-8.8 is block up-converter with fixed output power P1dB 0.2 W (ALC power: 30 mW) and LO of 8.8 GHz.

    This BUC operates with up to 25 carriers and has built-in reference of 10 MHz;

    has ALC with 25 dB range;

    + LED status indication is located at the rear side.

    BUC-Ku002-8.8
    BUC-Ku01-9.75

    BUC-Ku01-9.75 is block up-converter with fixed output power P1dB 1 W (ALC power: 100 mW) and LO of 9.75 GHz.

    Our BUC operates with up to 25 carriers and has built-in reference of 10 MHz;

    has ALC with 25 dB range;

    + LED status indication at the rear side.

    BUC-Ku01-9.75
    BUC-Ku02-10.6

    BUC-Ku02-10.6 is block up-converter with fixed output power P1dB 2 W (ALC power: 200 mW) and LO of 10.6 GHz.

    Our BUC operates with up to 25 carriers and has built-in reference of 10 MHz;

    and ALC with 25 dB range;

    + LED status indication at the rear side.

    BUC-Ku02-10.6
    BUC-Ku04-10.75

    BUC-Ku04-10.75 is block up-converter with fixed output power P1dB 4 W (ALC power: 400 mW) and LO of 10.75 GHz.

    Our BUC operates with up to 25 carriers and has built-in reference of 10 MHz;

    and ALC with 25 dB range;

    + LED status indication at the rear side.

    BUC-Ku04-10.75
    BUC-Ku10-11.3

    BUC-Ku10-11.3 is block up-converter with fixed output power P1dB 10 W (ALC power: 1000 mW) and LO of 11.3 GHz.

    Our BUC operates with up to 25 carriers and has built-in reference of 10 MHz;

    and ALC with 25 dB range;

    IP Ctrl (by order)

    + LED status indication at the rear side.

    BUC-Ku10-11.3
    BUC-Ku20-13.05

    BUC-Ku20-13.05 is block up-converter with fixed output power P1dB 20 W (ALC power: 2000 mW) and LO of 13.05 GHz.

    Our BUC operates with up to 25 carriers and has built-in reference of 10 MHz;

    and ALC with 25 dB range;

    + LED status indication at the rear side.

    BUC-Ku20-13.05
    LNB PLL LO 9.75

    Ku-band LNB PLL LO 9.75 is Low Noise Block Down Converter with single LO 9.75 GHz and single 75 Ohm F-type output. LO instability: ± 150 kHz, Gain: 45 dB, Noise figure: 0.9 dB, Output power P1dB: +3 dBm.

    LNB PLL LO 9.75
    LNB PLL LO 10.60

    Ku-band LNB PLL LO 10.60 is Low Noise Block Down Converter with single LO 10.60 GHz and single 75 Ohm F-type output. LO instability: ± 150 kHz, Gain: 45 dB, Noise figure: 0.9 dB, Output power P1dB: +3 dBm.

    LNB PLL LO 10.60
    LNB PLL LO 10.75

    Ku-band LNB PLL LO 10.75 is Low Noise Block Down Converter with single LO 10.75 GHz and single 75 Ohm F-type output. LO instability: ± 150 kHz, Gain: 45 dB, Noise figure: 0.9 dB, Output power P1dB: +3 dBm.

    LNB PLL LO 10.75
    LNB PLL LO 13.05

    Ku-band LNB PLL LO 13.05 is Low Noise Block Down Converter with single LO 13.05 GHz and single 75 Ohm F-type output. LO instability: ± 150 kHz, Gain: 45 dB, Noise figure: 0.9 dB, Output power P1dB: +3 dBm.

    LNB PLL LO 13.05
    LNB PLL LO 8.80

    Ku-band LNB PLL LO 8.80 is Low Noise Block Down Converter with single LO 8.80 GHz and single 75 Ohm F-type output. LO instability: ± 150 kHz, Gain: 45 dB, Noise figure: 0.9 dB, Output power P1dB: +3 dBm.

    LNB PLL LO 8.80
    LNB PLL LO 11.30

    Ku-band LNB PLL LO 11.30 is Low Noise Block Down Converter with single LO 11.30 GHz and single 75 Ohm F-type output. LO instability: ± 150 kHz, Gain: 45 dB, Noise figure: 0.9 dB, Output power P1dB: +3 dBm.

    LNB PLL LO 11.30